Skip to main content Skip to search Skip to navigation
Free shipping within Germany · EU from €14.90

Fan Spoofers



4 Items

Frequently Asked Questions about Fan Spoofers

What does a fan spoofer do?

It makes the miner believe its fans are spinning at the correct speed. The control board of an ASIC miner monitors the rpm signal of every connected fan; if that signal is missing, the firmware reads it as a fan failure, reports an error and shuts the machine down for protection. The spoofer — also called a fan emulator or simulator — is plugged into the fan header in place of the fan and supplies exactly that signal. This lets external cooling conversions run without error messages and without safety shutdowns.

When do I need one — and when not?

Only when the stock fans are actually removed, that is when converting to external cooling with an inline fan. If the stock fans stay in place and you simply attach a duct to the fan shroud, no spoofer is needed. The firmware matters too: a spoofer is required when the stock operating system is running — third-party systems such as Braiins OS offer an option to disable fan monitoring, in which case it works without one. If you are unsure, build the cooling run first and try the firmware option before adding hardware.

Which spoofer fits which miner?

Connectors and the number of headers differ from model to model, so there are four versions:

  • Antminer S19 — fits nearly all S19 models (Pro, J, J Pro, J Pro+, XP, T, A and A-Pro), but not the S19k Pro
  • Antminer S19k Pro — its own version, because the S19 spoofer does not fit here
  • Antminer S19J XP, S21, S21+, S21 Pro, S21 XP and T21 — the current generation
  • Whatsminer M30, M50 and M60 — 4-pin version for MicroBT machines

Check the exact model designation of your miner before ordering, not just the series — on the S19k Pro that difference decides.

2-in-1 or 4-in-1, with or without cable?

The number tells you how many fan headers one module serves: the 4-in-1 version covers four headers, the 2-in-1 version two. What counts is how many fan headers your miner actually uses — for the Antminer spoofers for the S19k Pro and the S21 series you can choose between both. For the Whatsminer spoofer the rule is one spoofer per fan, so removing both fans means you need two. The S19 version is additionally available with and without a cable set — without cables only makes sense if you already have suitable ones.

Is running the miner without fans safe then?

No — the spoofer replaces the signal, not the cooling. Without real airflow chip temperatures rise immediately, and the shutdown that would have warned you is precisely the one you just bypassed. So plan the cooling run first: shroud, duct and an adequately sized inline fan that moves at least as much air as the stock fans did. After the conversion keep an eye on chip and board temperatures in the web interface, especially during the first hours of operation and in summer.