The black plastic Dalap AP 200 DR axial duct fan is equipped with an AC motor. The speed can be continuously adjusted directly on the power cable. This makes it easy to adapt the performance to individual requirements. The high air throughput as well as the high static pressure ensure effective ventilation in almost all residential and commercial spaces. The fan is equipped with a mounting base for easy installation on the wall or ceiling and is compatible with ducts with a diameter of 200 mm. Combined with black accessories, this creates a uniform-looking installation.
Advantages of the Dalap AP 200 DR axial duct fan
- AC motor with continuously variable speed control
- High air throughput of up to 900 m3/h
- High static pressure of up to 380 Pa
- Protection class IP44
-
Power cable (160 cm) with plug for 230 V socket
- Mounting base for attaching to wall or ceiling
- High-quality plastic construction with high durability
-
Black version for a uniform appearance with black accessories
- Compatible with round ducts from the Dalap brand
High performance with speed control
The Dalap AP 200 DR duct fan with AC motor achieves a high air throughput of up to 900 m3/h and a static pressure of up to 380 Pa. Control is via a convenient rotary dial. After switching on, the fan starts at maximum speed, and further turning gradually reduces the performance. To switch off, the dial is turned past the maximum performance back to the off position. This makes it easy to adapt the performance to individual requirements – whether continuous ventilation at lower performance or rapid extraction of moisture or odours.
The Dalap AP DR duct fan has a speed controller directly on the power cable.
Filter and non-return flap
Thanks to its high performance, the fan is suitable for systems with filter elements or an odour-tight flap. There it ensures reliable extraction without backflow. It can also be used in environments with increased humidity.
The duct fan is used to move clean air. Therefore, when used in kitchens, workshops, storage rooms or garages, it is recommended to install a grease filter or another suitable filter in front of the fan.
Construction and installation
The fan is made of high-quality plastic, the construction is sturdy and durable. Installation is made easier by a mounting base. This is first fastened to the wall or another solid surface with screws. The fan is then clicked into the base, which holds it securely in place. For easy maintenance, the fan can be removed from the mounting base. The fan comes with a 1.6 m power cable with speed controller and plug included.
The fan is designed for the direct connection to a ventilation duct system and is compatible with Dalap ducts of the same diameter. To seal the flanges and for a better fit in the duct system, we recommend using LPM tape. Insulation tape or the self-adhesive Dalap DFLEX insulation can also be placed under the fan to dampen vibrations.
Connection diagram of the Dalap AP DR to the duct system. The arrows indicate the direction of the air flow.
Best combined with black accessories
The fan can easily be combined with black ventilation accessories, creating a colour-coordinated and aesthetically uniform solution. Flexible metal air ducts of the Dalap ALUDAP D type can be used for air routing.
For a secure fit and sealing during installation, we also recommend using metal hose clamps and black aluminium tape. The entire installation can be complemented with black air vents. These help to optimise the air flow and the appearance of the ventilation system.
The Dalap AP DR fan is compatible with Dalap ventilation ducts. Shown here with a black, flexible ALUDAP D duct and MCD hose clamps.
Technical data
| Diameter [mm] |
200 |
| Air flow [m³/h] |
900 |
| Static pressure [Pa] |
380 |
| Power consumption [W] |
132 |
| Speed [min] |
2310 |
| Rated current [A] |
0,61 |
| Protection class [IP] |
44 |
| Voltage [V] |
230 |
| Frequency [Hz] |
50 |
| Max. temperature [°C] |
60 |
| Weight [kg] |
2,65 |
| Application area |
office , laundry , large kitchens , living rooms |
| Ball bearing |
yes |
| Colour |
black |
| Control |
manual |
| Marking [CE] |
CE |
| Application |
for air extraction |
| Mounting |
into the ventilation duct |
| Version |
with regulation |
| Connecting cable length [m] |
1,6 |
| Fan design |
Axial |
| Model |
AP 200 DR |
